Home » Our Products » Tapes for Electrical/Electronic Industry

Tapes for Electrical/Electronic Industry


 POLYESTER TAPE


Description :
Polyester tape is the most commonly used material mainly used for SMPS transformers and electrical relays for temperature application up to 130°in general purpose insulation.
Product Code Unit A-103(Non UL) A-104 UL Approved A-105R A-109RT
Total Thickness (MM) 0.055 0.055 0.06 0.06
Adhesive Strength (N/cm (min) 2 2 3 2
Breakdown Voltage Volts 5000 5000 5000 5000
Temperature Class °C B-130°C B-130°C B-130°C B-130°C
Base Material --- Polyester Film Polyester Film Polyester Film Polyester Film

APPLICATION
  • Film and foil capacitors
  • Phase and coil - end insulation
  • Very good varnish resistance properties
  • Strengthening of edges for slot
  • Core Layer and final insulations of transformers, SMPS, chalk, coils etc
  • Final wrapping of cast resin capacitors
  • Transformer windings
  • Cable jointing

FEATURE
  • No 'edge' lifting in our tapes
  • UL approved file no. E 175468
  • ROHS compliance
  • Offer superior electrical insulation and heat resistance

NOTE
  • The above mention products codes are also available in total
  • Thickness of 0.085- 0.090mm . TDS can be provided as per asking for more details
  • A-103 & A-104 both are acrylic based
  • A-105R , where "R" stands for Rubber based adhesive
  • A-109RT where "T" stands for Transparent

Color Available: - Black, Blue, Red, Green & Yellow
 SOLVENT RESISTANT POLYESTER TAPE


Description :
A-108SRT is a precured thermosetting adhesive and has excellent initial chemical and solvent resistance.
Product Code Unit A-108SRT
Total Thickness (MM) 0.060
Adhesive Strength (N/cm (min) 4.0
Breakdown Voltage Volts 5000
Temperature Class °C F-155°C
Base Material --- Polyester Film

APPLICATION
  • Final wrapping of cast resin capacitors and film/foil capacitors
  • Core , Layer and final insulation of small transformer, relay and chocking coils.

FEATURE
  • This tape has excellent properties of solvent resistance ideally suitable for oil cool transformer manufacturers.
  • This tape has an excellent adhesion properties on enameled copper wires.

Color : - Transparent
 POLYESTER TAPE WITH WHITE ADHESIVE


Description :
Polyester tape is the most commonly used material mainly used for SMPS transformers and electrical relays for temperature application up to 130°in general purpose insulation.
Product Code Unit A1100WA
Total Thickness (MM) 0.055 ± 0.005
Adhesive Strength (N/cm (min) 2.0
Breakdown Voltage Volts 5000
Temperature Class °C B (Temperature range up to 130°C)
Base Material --- Polyester film

APPLICATION
  • Specially suited for use with wax or other kind of greased wires or parts where non corrosive part is required
  • Heat resistance and hot dryer and air dryer varnish resistance

FEATURE
  • ROHS compliance
  • Offer superior electrical insulation and heat resistance
  • Adhesive aside is 'White' color to meet requirement of OEM where they want to make it "Opaque" for the winding parts.

Color - Yellow, Blue
 HIGH TEMPERATURE POLYESTER TAPE FOR PCB MASKING/POWDER COATING


Description :
A-106H polyester tape is having very good properties of resisting high temperature in the masking application specially designed for PCB manufacturers.
Product Code Unit A-106H
Total Thickness (MM) 0.075
Adhesive Strength (N/cm (min) 2.6
Breakdown Voltage Volts 6000
Temperature Class °C H 200°C
Base Material --- Polyester Film

APPLICATIONS
  • PCB making- masking

FEATURE
  • Gold finger protection web soldering through the solder oven
  • Lithium battery manufacturing
  • Masking in powder coating process

Color : - Green
 PINK RAYON TAPE


Description :
A-101 is a Rayon fabric based tape. 2. A-102 is a Polyester fabric based tapes.
Product Code Unit A-101 A-102
Total Thickness (MM) 0.24 0.24
Adhesive Strength (N/cm (min) 3 3
Breakdown Voltage Volts 2000 2000
Temperature Class °C B-130°C B-130°C
Base Material --- Rayon Fabric Polyester Fabric

APPLICATIONS
  • Motor manufacturing process as core , interlayer and final wrap in small coils. It has very good aberration resistance and shearing strength.

Color:- Pink
 PVC TAPE


Description :
It is made SPVC film coated with a rubber based adhesive on one side. High elongation and excellent conformability for wire harness.
Product Code Unit 218S
Total Thickness (MM) 0.12 ± 0.01
Adhesive Strength (gf/18mm) 240 (min)
Dielectric Strength (for 1 minute) (kv) 5
Base Material --- PVC

APPLICATION
  • Used as release film while curing in Armature coil during resin consolidation process

Color:- Black, Red,Green,White,Yellow, Orange,Grey,Blue,Violet & Sky Blue color
 POLYESTER TAPE FOR SPLICING PURPOSE


Description :
AP-020 is designed for mounting of badges signs made of metal and plastic splicing of thin plastic or metal films. Use for core strengthening application in film manufacturing and processing units, for manual splicing of films POLYESTER , BOPP/ LDPE and HDPE etc.
Product Code Unit AP-020
Total Thickness (MM) 0.100 ± 0.005
Adhesive Strength (N/cm (min) 9.0
Temperature Class °C B ( Temperature range up to 130°C)
Base Material --- Polyester Film

APPLICATION
  • Splicing of substrates & HDPE film Splicing

FEATURE
  • High Adhesion Bond & Good shearing Strength

Color:- Red and Transparent
 POLYESTER FLEECE TAPE


Description :
APF-030 is polyester reinforced polyester fleece adhesive tape with acrylic adhesive suitably designed for FHP motor coil insulation.
Product Code Unit APF-030
Total Thickness (MM) 0.190 ± 0.010
Adhesive Strength (N/cm (min) 8.0
Breakdown Voltage Volts 6000
Temperature Class °C F (Temperature range up to 155°C )
Base Material --- Polyester Reinforced Polyester fleece

APPLICATION
  • Coil insulation in FHP motors winding.

FEATURE
  • The tape performs well in the tapping application of FHP motors due to high-tack adhesive strength.

NOTES
  • Different thickness are available upon asking for specific requirement.

Color:- Natural
 POLYIMIDE FILM TAPE


Description :
Polyimide Film tape has very good efficiency in performing for high temperature application and in stressful conditions specially used in Traction motors and HV rotating machines.
Product Code Unit P-91 P-93
Total Thickness (MM) 0.063 0.065
Adhesive Strength (N/cm (min) 2.4 2.4
Breakdown Voltage Volts 6500 6500
Temperature Class °C H-180°C H-180°C
Base Material --- Polyimide film Polyimide film

APPLICATION
  • HT Electrical motors, traction machine manufacturing, insulation or Bar wound armature.

Color:- Amber
 PET SEAL


Description :
APET-2 is a polyester release film with silicone release coat on both sides.
Product Code Unit APET-2
Total Thickness (MM) 0.050± 0.005
Temperature Class °C 180
Base Material --- Polyester Film

APPLICATION
  • Used as release film while curing in Armature coil during resin consolidation process.

Color:- Transparent
 POLYAMIDE /NOMEX TAPE


Description :
Polyamide/ Nomex tape has very high efficiency in performing for high temperature application and in stressful conditions specially used in Traction motors and rotating machines for wrapping of conductors. Nomex is the Registered Trade mark of "DuPont".
Product Code Unit P-92N
Total Thickness (MM) 0.100/0.140
Adhesive Strength (N/cm (min) 3.00
Breakdown Voltage Volts 2000/3000
Temperature Class °C F-155°C
Base Material --- Nomex aramid paper

APPLICATION
  • Electrical motors, traction machine manufacturing, insulation or Bar wound armature.

Color:- Off White
 ACETATE CLOTH TAPE


Description :
Unique electrical tape offering excellent comformebility ability in coil wrapping application. It also offers excellent absorption of Resin & varnishes. It has got the excellent property of sound dampening.
Product Code Unit A-131UL
Total Thickness (MM) 0.24
Adhesive Strength (N/cm (min) 3.5 min
Breakdown Voltage (kv) 1.5 min
Temperature Range °C Up to 130°C
Base Material --- Acetate rayon

APPLICATION
  • Suitably used for insulation in degaussing coils and picture tube yoke.
  • Insulating - Electrical wire
  • Electronic device
  • Bundling, protecting
  • Wire Harness

FEATURE
  • Flame Retardent
  • Easy cut and excellent flexibility for optimum bundling of wires
  • Insulation and corrosion and resistant

NOTE
  • This product has got UL certification under file no. E 175468

Color:- Yellowish Brown
 ALUMINIUM TAPE H CLASS


Description :
AL-004 is an aluminum foil tape coated with polysiloxane adhesive ideally suitable for EMF/RFI shielding of motors and transformers.
Product Code Unit AL-004L
Total Thickness (MM) 0.130
Adhesive Strength (N/cm (min) 2.0
Temperature Class °C Up to 200°C
Base Material --- Aluminium Foil

APPLICATION
  • AL-004L is used as heat conducting in refrigerators for fixing of condenser made of steel tube to the steel sheets.
  • It is also used for EMF/RFI shielding for motor and transformers cables and cabinets at high temperature

FEATURE
  • Aluminum Backing provides excellent reflection of both heat and light.
  • Aluminum foil coated with polysiloxane adhesive prevents fire incidents as it acts as a flame retardant.
  • Low Moisture vapor transmission rate makes an excellent vapor barrier.

Color:- Natural
 GLASS CLOTH ADHESIVE TAPE


Description :
Glass Cloth Tape with silicone Adhesive provides superior product performance and FR properties for automotive harness application, heat tracing for oil and gas companies, coil insulation in LT motors. High temperature and high abrasion resistant properties makes it matchless product its class.
Product Code Unit A121-H UL AGCF - 895 AGCB - 896 AGCS - 897
Total Thickness (MM) 0.180 0.190 0.165 0.180
Adhesive Strength (N/cm (min) 2.5 2.5 2.0 2.5
Breakdown Voltage Volts 2000 2000 2000 2000
Temperature Class °C H(Temperature range upto 180°C) F (Tem-perature 155+°C) B (Tempera-ture range upto 130°C) S(Temperature range upto 240°C)
Base Material --- Glass Fabric Glass Fabric Glass Fabric Glass Fabric

APPLICATION
  • Tear and temperature resistant tapes with excellent abrasion resistance and high mechanical strength.
  • Interphase insulation, holding and general insulations of coils and transformers.
  • Cable harnessing at high temperature.

NOTE
  • This product has got UL certification under file no. E 175468

Color:- White



 Masking Tape


A premium and economical grade general purpose Masking Tape provides excellent Pressure Sensitive and quick qualities and resistance to water, solvents and oils.
 Duct Tape


This superior quality tape is commonly used in areas which require flexible, strong and very sticky tape. It is hand tearable tape.
 BOPP Tape


The BOPP tape is available in different colours. BOPP tape is used in carton box sealing
 Surface Protection Film


SPF films are used by the building industry to prevent scratching and marking during processing , assembling , transport and storage.
 Aluminium Tape


A soft silver aluminium foil combined with a high performance synthetic acrylic adhesive offering excellent temperature and environmental resistance. Ideal for holding and sealing.
 Floor Marking Tape


Floor Marking Tape is being widely used now days for Safety, Identification and lane Marking for storage segmentation. Ideal for ISO 9001, TS 16949 Companies, good resistance to chemical & other moving objects. Available in various sizes & colors.



 TOP